Greenhouse ventilation fans help move hot, humid air out and reduce stagnant pockets around plants, but the right setup depends on greenhouse size, layout, and power access. My best overall pick is the Cammoo 20-Inch Exhaust Fan, which pairs 4,000 CFM with temperature, humidity, and speed controls. For high-volume circulation, the 1/2 HP Greenhouse Circulation Fan offers 7,860 CFM, while the iLIVING 20-Inch Shutter Exhaust Fan is a strong alternative for buyers who want thermostat control and variable speed. The main tradeoffs are exhaust versus circulation, airflow versus noise and power use, and the convenience of automatic controls versus simpler setups. Read on for the full comparison, ranking logic, and guidance on choosing a fan that suits your growing space.
Get garden gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Complete the kit
Key Takeaways
- The Cammoo 20-Inch Exhaust Fan earns the overall lead by combining 4,000 CFM with temperature, humidity, and speed control, giving buyers more control than a basic exhaust-only model.
- High airflow and air exchange are not the same job: the 7,860 CFM circulation fan and 5,470 CFM misting circulation fan move air within a greenhouse, while shutter fans are designed to exhaust air through a wall.
- Fan diameter alone does not settle capacity. The listed 12-inch models range from 971 CFM for the Hon&Guan to 1,347 CFM for the VEVOR, so compare stated airflow and control features rather than size alone.
- Small grow spaces have distinct options. The 5-inch dual-fan kit and VIVOSUN 6-inch clip fan support localized movement, but they are not substitutes for a properly sized exhaust fan in a larger greenhouse.
- Solar models trade dependable grid power for installation flexibility. The two solar kits may suit sheds or sites without convenient wiring, while buyers needing predictable operation should assess battery capacity, sunlight, and backup power.
| greenhouse ventilation fan | Airflow | Fan speed | Mounting | Noise level |
|---|---|---|---|---|
| Greenhouse Circulation Fan 1/2 | 7,860 CFM | 1,725 RPM | Wall mount | — |
| Cammoo 20 Inch Exhaust Fan wit | 4,000 CFM | — | Wall mount | — |
| Grow Tent Fan | 330 CFM | — | Clip clamp | 45 dB |
| VEVOR 12 in Shutter Exhaust Fa | 1,347 CFM | — | Wall mount with automatic louvers | 60 dB |
| 10 Inch Industrial Exhaust Blo | 2,400 CFM | 3,300 RPM | — | 79 dB |
| Greenhouse Air Circulation Fan | 5,470 CFM | 1,725 RPM | — | — |
| VIVOSUN AeroWave E6 Gen2 Grow | 320 CFM | — | — | 33 dB |
| iLIVING 20-Inch Wall Mounted S | Up to 3,368 CFM | 980 RPM | — | Under 69 dB |
| 8” Upgraded Shutter Exhaust F | 760 CFM | 1,600 RPM | Wall mount | 40 dB |
| Amico 12" Shutter Exhaust Fan | 1,282 CFM | 1,858 RPM | Wall mount | 50 dB |
| Solar Powered Fan Kit for Chic | Over 200 CFM | 3000 RPM | — | — |
| iLiving 12" Wall Mounted Shutt | 960 CFM | 1650 RPM | Wall mount | Under 65 dB |
| VEVOR 10 Inch Shutter Exhaust | 900 CFM | 1650 RPM | Wall mount | 55 dB |
| Hon&Guan 12-Inch Wall Mount Ex | 971 CFM | 1500 RPM | Wall mount | — |
| Solar Exhaust Fan with Battery | 1020 CFM | 1250 RPM | Wall mount | 50 dB |
More Details on Our Top Picks
Greenhouse Circulation Fan 1/2 HP 115V Ceiling Wall Mount Fan, 7860 CFM, ETL Listed
For a greenhouse that needs broad, forceful air movement, this fan’s stated 7,860 CFM gives it a different job from the smaller exhaust models in this lineup. It circulates air rather than pulling it through a shutter, so it suits spaces where reducing stagnant pockets is the priority. Compared with the Cammoo 20 Inch Exhaust Fan, it offers nearly twice the listed airflow, but the Cammoo uses far less power and adds temperature, humidity, and speed controls. This fan’s single speed keeps operation simple, yet leaves less room to adjust airflow as conditions change. Its 405W draw and wall-mount requirement also call for planning around power use and placement. I’d favor it for a large greenhouse with a clear mounting location, not a small grow space needing finely controlled ventilation.
Pros:- Listed 7,860 CFM suits broad air circulation in larger spaces.
- Aluminum blades are described as corrosion-resistant for humid greenhouse conditions.
- ETL listing provides a stated safety certification.
- Wall mounting keeps the fan off growing surfaces and floor space.
Cons:- Single-speed operation limits adjustment as temperatures and plant needs change.
- The 405W draw is substantially higher than the 70W Cammoo exhaust fan.
- Requires a suitable wall-mount location and does not provide exhaust shutters.
Best for: Growers with a large greenhouse who need strong fixed-speed circulation and have a suitable wall-mount location.
Not ideal for: Small greenhouse and grow-tent owners who need quiet, low-power airflow or adjustable speed and environmental controls.
- Airflow:7,860 CFM
- Motor power:1/2 HP
- Wattage:405W
- Voltage:115V/60Hz
- Current:3.7A
- Fan speed:1,725 RPM
- Speed settings:1
- Mounting:Wall mount
- Certification:ETL
Our verdict“Choose this fan for high-volume, fixed-speed circulation in a larger greenhouse, but pick the Cammoo if low power use and automatic control matter more.”
Cammoo 20 Inch Exhaust Fan with 4000 CFM, Temp, Humidity, and Speed Control
The Cammoo stands apart by pairing 4,000 CFM exhaust with a touchscreen that offers speed, temperature, humidity, timer, and cycle controls. That makes it a stronger fit for growers who want ventilation to respond to greenhouse conditions, rather than running a basic fan at one fixed setting. Its 70W EC motor is a more power-conscious alternative to the 405W Greenhouse Circulation Fan, although that other model lists much higher airflow for moving air around a large area. The distinction matters: Cammoo is designed to exhaust air through a wall, while the circulation fan moves air within the space. A 10-speed range gives more control than either single-speed or small clip-fan setups, but the controller and installation add complexity. I’d skip the extra controls if all you need is straightforward, manually operated airflow.
Pros:- 10 speed settings allow finer airflow adjustment than the single-speed circulation fan.
- 70W EC motor uses less listed power than the 405W high-volume circulation model.
- Touchscreen supports temperature, humidity, timer, and cycle settings.
- Galvanized steel frame and aluminum blades are suited to regular ventilation duty.
Cons:- Controller and installation may be more involved than a basic fan setup.
- Its 4,000 CFM is lower than the 7,860 CFM listed for the Greenhouse Circulation Fan.
- Wall-mounted exhaust design is not a substitute for a clip fan aimed at a specific plant canopy.
Best for: Greenhouse growers who want wall-mounted exhaust with adjustable speed and temperature or humidity-based control.
Not ideal for: Buyers seeking a simple circulation fan, a compact clip-on option, or an installation with minimal setup and controls.
- Airflow:4,000 CFM
- Wattage:70W
- Voltage:120V
- Speed settings:10
- Motor:Brushless EC
- Blade count:3
- Mounting:Wall mount
- Controls:Touchscreen; temperature, humidity, timer, and cycle settings
Our verdict“Pick the Cammoo if you want adjustable, condition-aware exhaust in a greenhouse and are willing to handle a more involved setup.”
Grow Tent Fan, 5-inch Dual Fans for Greenhouse Ventilation, 3 Speeds, IP54 Waterproof, Includes Timer and Thermostat Compatibility
This two-fan set is the compact choice for directing airflow around a grow tent or a small greenhouse, rather than ventilating a full-size structure. Its clip-clamp mounting and adjustable tilt make it easier to aim circulation at a canopy or corner than the fixed wall-mounted VEVOR 12-inch shutter exhaust fan. The pair is listed at 330 CFM and 6W, so it trades the high-volume exhaust of that VEVOR for targeted, low-power air movement. Three speeds help match airflow to a smaller space, while the IP54 rating is a useful feature for humid growing conditions. These fans do not replace an exhaust system when heat or moisture needs to leave the greenhouse. The listed 45 dB noise level and need for a separate timer or thermostat for automation are the main compromises.
Pros:- Two compact fans provide targeted airflow in tent-sized spaces.
- Three speed settings and adjustable tilt support directional control.
- IP54 rating is suited to humid growing environments.
- 6W listed wattage keeps power demand low.
Cons:- 330 CFM is limited for ventilating a large greenhouse.
- Timer or thermostat automation requires compatible external equipment.
- 45 dB may be noticeable at higher speeds in a quiet grow space.
Best for: Grow-tent growers and owners of small greenhouses who need adjustable, clamp-mounted circulation near plants.
Not ideal for: Growers ventilating a large greenhouse or needing a fan that actively exhausts hot, humid air outdoors.
- Fan size:5 inches each
- Included fans:2
- Airflow:330 CFM
- Wattage:6W
- Speed settings:3
- Noise level:45 dB
- Motor:Brushless
- Mounting:Clip clamp
- Water resistance:IP54
Our verdict“Choose this set for adjustable, low-power circulation in a tent or small greenhouse, not as a replacement for a wall-mounted exhaust fan.”
VEVOR 12 in Shutter Exhaust Fan Wall-Mount Automatic Louvers Variable Speed, Steel Housing, Low Noise, AC Motor, 1347 CFM Ventilation for Attic, Garage, Workshop
The VEVOR 12-inch fan is a practical wall-exhaust option for growers who need to move air outdoors without the Cammoo’s touchscreen control system. Its 1,347 CFM is well below the Cammoo’s 4,000 CFM and the Greenhouse Circulation Fan’s 7,860 CFM, so I’d reserve it for a smaller greenhouse or as part of a multi-fan setup. Automatic louvers help close the opening when the fan is off, while the steel housing suits utility spaces. The listed variable-speed motor offers more flexibility than the one-speed circulation model, though the provided specs do not describe environmental automation. At 58W, it uses less listed power than the larger circulation fan, but its 60 dB noise rating may matter if the greenhouse is near living areas. The product data also labels indoor use, so I would verify exposure needs before fitting it in a weather-facing wall.
Pros:- Automatic louvers close the wall opening when the fan is not running.
- Variable speed offers more adjustment than the single-speed circulation fan.
- 58W listed wattage is lower than the 405W high-volume circulation model.
- Steel housing and included expansion bolts support a fixed wall installation.
Cons:- 1,347 CFM is modest beside the Cammoo and high-volume circulation fan.
- The listed 60 dB noise level may be distracting in a quiet setting.
- Product data specifies indoor use despite describing shutters for rain protection.
Best for: Owners of small-to-medium greenhouse spaces who want a wall-mounted exhaust fan with automatic louvers and variable speed.
Not ideal for: Large greenhouse operators needing high airflow, growers who want built-in temperature or humidity automation, or buyers requiring a clearly outdoor-rated fan.
- Fan size:12 inches
- Airflow:1,347 CFM
- Wattage:58W
- Voltage:120V
- Speed:1,600 RPM
- Noise level:60 dB
- Motor:AC
- Housing material:Alloy steel
- Mounting:Wall mount with automatic louvers
Our verdict“Choose this VEVOR for modest, adjustable wall exhaust with automatic louvers, but look to the Cammoo for higher airflow and environmental controls.”
10 Inch Industrial Exhaust Blower Fan with 32.8 ft Flexible Duct Hose
Unlike the wall-mounted VEVOR and Cammoo, this blower routes air through a 32.8-foot flexible duct, which can help when a greenhouse has no convenient wall opening or needs temporary extraction from a specific area. Its listed 2,400 CFM exceeds the VEVOR 12-inch fan’s 1,347 CFM, but it does not offer the Cammoo’s environmental controls or lower 70W draw. The blower’s 380W motor and 79 dB noise rating make it a more industrial choice than a quiet, continuous greenhouse circulation fan. A 6.6-foot power cord may also limit where it can sit without an extension. Thermal protection adds a safety feature for demanding operation, while the flexible hose gives this model more placement options than fixed wall units. I’d choose it for directed exhaust or temporary ventilation, not quiet everyday airflow around plants.
Pros:- 32.8-foot flexible duct can route exhaust away from the blower location.
- 2,400 CFM provides more listed airflow than the VEVOR 12-inch exhaust fan.
- Portable design supports temporary or repositioned ventilation.
- Thermal protection adds a safeguard during heavy-duty operation.
Cons:- 79 dB is much louder than the 45 dB listed for the compact grow-tent fans.
- 380W draw is high compared with the Cammoo’s 70W.
- The 6.6-foot cord may restrict placement, and the ducted setup takes more space than a wall fan.
Best for: Growers and workshop users who need ducted, portable extraction from a greenhouse area without relying on a fixed wall fan.
Not ideal for: Those seeking quiet continuous circulation, low power consumption, or a simple permanent wall-mounted exhaust installation.
- Airflow:2,400 CFM
- Power:380W
- Voltage:110–120V
- Fan speed:3,300 RPM
- Noise level:79 dB
- Duct hose length:32.8 feet
- Inlet diameter:11.8 inches
- Outlet diameter:10.6 inches
- Cord length:6.6 feet
Our verdict“Pick this blower when duct routing and portable extraction matter more than low noise, low power use, or convenient permanent mounting.”
Greenhouse Air Circulation Fan with Mist and Water Pipe, 1/3 HP, 115V, Ceiling/Wall Mount, High Speed, 5470 CFM, 18000 BTU, ETL Listed
For a large greenhouse where air movement and evaporative cooling are both priorities, this fan stands apart from the exhaust-focused iLIVING 20-Inch Wall Mounted Shutter Exhaust Fan. Its listed 5,470 CFM airflow circulates air, while the included misting system is intended to cool outdoor areas—useful when ventilation alone is not enough to manage heat. The corrosion-resistant metal construction and ETL listing also suit demanding installations better than a small clip fan such as the VIVOSUN AeroWave E6 Gen2.
The tradeoff is installation: at 39.1 pounds, it may take help to mount securely, and its industrial, misting-focused design is less suitable for a compact indoor grow tent. I’d choose it for a spacious greenhouse with appropriate water access, not as a simple exhaust solution or quiet personal fan.
Pros:- 5,470 CFM airflow is suited to moving air through large areas.
- Misting system adds a cooling option beyond ordinary circulation.
- Corrosion-resistant metal construction is intended for outdoor or industrial use.
- ETL listed.
Cons:- At 39.1 pounds, mounting may require assistance and a suitably strong support.
- Misting requires a water connection and is not a substitute for humidity control.
- Industrial scale and function are a poor fit for small indoor growing spaces.
Best for: Owners of large greenhouses or covered growing areas who want strong air circulation plus mist-assisted cooling and can support a substantial mount.
Not ideal for: Small indoor growers and anyone seeking a straightforward wall exhaust fan; the misting setup and heavy body may be more than their space needs.
- Airflow:5,470 CFM
- Motor:1/3 HP
- Fan speed:1,725 RPM
- Power:380 W
- Electrical:115V / 60Hz, 3.8A
- Dimensions:22.6 × 14.3 inches
- Material:Corrosion-resistant metal
- Certification:ETL listed
Our verdict“Choose this for a large greenhouse that needs forceful circulation and mist-assisted cooling, but skip it for compact spaces or basic exhaust duty.”
VIVOSUN AeroWave E6 Gen2 Grow Tent Oscillating Clip Fan, 6-inch, 1-Pack
The VIVOSUN AeroWave E6 Gen2 fills a different role from the wall-mounted exhaust models in this group: it moves air within a growing space rather than venting hot air outdoors. Its oscillation and 10 speed settings let growers tune circulation around plants, while the 33 dB noise rating makes it a quieter choice than a large industrial fan such as the iLIVING 20-Inch Shutter Exhaust Fan. At just 1.6 pounds, the clip-on format also suits tent frames where a wall installation is impractical.
Smart Wi-Fi control is useful for adjusting airflow without reaching into a crowded tent, and the IP54 rating adds protection in humid growing conditions. But its 320 CFM output is for localized circulation, not whole-greenhouse ventilation. Full app control depends on Wi-Fi, so buyers who want a simple standalone exhaust setup should look at the 8-inch shutter fan instead.
Pros:- Oscillation and 10 speeds provide more airflow adjustment than a basic clip fan.
- 33 dB noise rating suits indoor growing rooms.
- Lightweight clip-on design avoids dedicated wall or ceiling mounting.
- IP54 rating and Wi-Fi app control add useful features for grow tent use.
Cons:- 320 CFM is limited for whole-greenhouse ventilation.
- Full smart control requires a Wi-Fi connection.
- Plastic blades and body are less suited to industrial-scale use than metal exhaust fans.
Best for: Indoor gardeners with a grow tent or small growing room who need adjustable, oscillating air circulation and app-based control.
Not ideal for: Greenhouse owners who need to exhaust heat and moisture outdoors or circulate air across a large growing area; this compact fan is not a whole-space ventilation system.
- Airflow:320 CFM
- Fan size:6 inches
- Speeds:10
- Noise level:33 dB
- Power:12 W
- Voltage:12 V
- Weight:1.6 lb
- Warranty:2 years
Our verdict“Pick the AeroWave E6 Gen2 for quiet, controllable circulation inside a grow tent, not for exhausting air from a full greenhouse.”
iLIVING 20-Inch Wall Mounted Shutter Exhaust Fan with Thermostat and Variable Speed Controller
For buyers whose main goal is removing hot, humid greenhouse air, the iLIVING 20-inch shutter fan is a more direct fit than the misting circulation fan in this lineup. It delivers up to 3,368 CFM through a wall-mounted exhaust design, with automatic shutters that close when the fan is off. Its thermostat and variable-speed control offer more hands-off adjustment than the 8-inch Upgraded Shutter Exhaust Fan, which has three speeds.
The tradeoff is scale: a 20-inch wall opening and 26-pound body call for a suitable mounting location, and the stated noise level can reach under 69 dB, which may be noticeable near work areas. Its three speed settings also provide less fine control than the Amico 12-inch fan’s eight. I’d favor this model for a larger greenhouse with a planned wall installation, rather than a small shed or tent.
Pros:- Up to 3,368 CFM is suited to ventilating large spaces.
- Automatic shutters close when the fan is off.
- Thermostat and variable-speed controls support adjustable operation.
- Galvanized steel frame and aluminum shutters and blades suit demanding installations.
Cons:- A 20-inch opening and 26-pound unit can complicate installation.
- Noise may be noticeable at maximum operation.
- Three speeds offer less fine adjustment than the Amico 12-inch fan’s eight settings.
Best for: Greenhouse operators who need wall-mounted exhaust for a large area and want thermostat and variable-speed control.
Not ideal for: Small greenhouse owners without a suitable 20-inch wall opening, or growers who need quiet, localized circulation rather than exhaust.
- Airflow:Up to 3,368 CFM
- Blade diameter:20 inches
- Motor:1/5 HP direct drive
- Electrical:115V, 2.2A
- Power:253 W
- Fan speed:980 RPM
- Noise level:Under 69 dB
- Weight:26 lb
- Certifications:UL, cUL
Our verdict“Choose this wall exhaust fan for large greenhouses with room for a 20-inch installation and a need for thermostat-led ventilation.”
8” Upgraded Shutter Exhaust Fan with Thermostat & Remote, 760 CFM
This 8-inch shutter fan is the more compact exhaust option compared with the iLIVING 20-inch model: its 760 CFM airflow is aimed at smaller spaces where a large wall fan would be excessive. A thermostat, remote, and automatic shutters make routine ventilation easier to manage, while the listed 40 dB noise level is lower than the iLIVING’s stated maximum. The metal construction and wall-mount format suit a greenhouse, shed, or coop with an accessible exterior wall.
That smaller footprint also limits how much air it can move. It is not a substitute for a high-capacity fan in a large greenhouse, and wall mounting means it cannot provide the flexible placement of the VIVOSUN clip fan. Buyers should also plan for installation and a suitable wall opening. I’d choose it for targeted exhaust in a modest space, especially when remote control is useful.
Pros:- Thermostat and remote allow convenient adjustments without reaching the fan.
- Automatic shutters help limit rain, dust, and pests when the fan is off.
- Three speeds provide basic airflow control.
- 40 dB listed noise level is lower than the larger iLIVING fan’s stated maximum.
Cons:- 760 CFM is not suited to large greenhouse ventilation needs.
- Wall mounting requires a suitable opening and installation work.
- The 40 dB rating may still be audible in a quiet growing space.
Best for: Owners of small greenhouses, sheds, or coops who want thermostat-controlled wall exhaust with a remote.
Not ideal for: Growers ventilating a large greenhouse or anyone without an appropriate wall location; 760 CFM is modest beside the 20-inch iLIVING exhaust fan.
- Airflow:760 CFM
- Fan size:8 inches
- Speeds:3
- Noise level:40 dB
- Power:26 W
- Voltage:120 V
- Fan speed:1,600 RPM
- Controls:Thermostat, push buttons, remote
- Mounting:Wall mount
Our verdict“Choose this for convenient, modest-capacity exhaust in a small greenhouse, but select a larger fan for substantial air exchange.”
Amico 12″ Shutter Exhaust Fan with Thermostat, 1282 CFM, 8-Speed, 25W DC Motor
The Amico sits between the compact 8-inch shutter fan and the larger iLIVING 20-inch exhaust model: it offers 1,282 CFM in a 12-inch wall-mounted format. Its eight speed settings give growers finer airflow adjustment than the smaller fan’s three, while the brushless DC motor is rated at 25 watts. That combination suits a greenhouse where ventilation needs change over the day and the fan may run for extended periods.
A thermostat and automatic gravity louvers add automatic operation and weather protection, and its pre-wired, plug-and-play installation is less involved than mounting a heavier industrial fan. Still, this is not the quietest option in the group: its listed 50 dB is above the 8-inch fan’s 40 dB. It also lacks a remote, so adjustments happen at the controls. I’d pick it for adaptable mid-sized exhaust, not remote-first operation.
Pros:- Eight speeds allow finer airflow adjustment than the 8-inch fan’s three settings.
- 25 W brushless DC motor is rated for low power draw.
- Thermostat and automatic gravity louvers support hands-off operation and weather protection.
- Pre-wired, plug-and-play design simplifies setup compared with a larger industrial wall fan.
Cons:- 50 dB noise level may be noticeable in quiet growing areas.
- No remote control is listed.
- 1,282 CFM falls short of the large-area airflow offered by the iLIVING 20-inch model.
Best for: Greenhouse owners needing mid-range wall exhaust, detailed speed control, and thermostat operation from an energy-conscious motor.
Not ideal for: Buyers who need remote adjustments, very quiet operation, or the higher airflow capacity of a large 20-inch exhaust fan.
- Airflow:1,282 CFM
- Fan size:12 inches
- Motor:25 W brushless DC
- Speeds:8
- Voltage:120 V
- Fan speed:1,858 RPM
- Noise level:50 dB
- Coverage area:1,400 sq. ft.
- Mounting:Wall mount
Our verdict“Choose the Amico for adjustable, lower-power exhaust in a mid-sized greenhouse, but look elsewhere if quiet or remote control matters most.”
Solar Powered Fan Kit for Chicken Coop Ventilation
I’d choose this kit when a greenhouse needs basic daytime exhaust without a new electrical run. Its dual fans deliver over 200 CFM, making it a better fit for a small greenhouse or a targeted hot spot than for exchanging air across a large growing space. The 20W solar panel and plug-and-play setup keep installation straightforward, while the extension cable gives some flexibility in panel placement. Compared with the Solar Exhaust Fan with Battery & Dual Solar Panels, this kit is simpler but lacks stored power for night or low-sun operation. That makes sunlight its main limitation: output can vary with conditions, and the listed single power level offers less control than the adjustable AC models. I’d skip it for a greenhouse that needs steady ventilation after sunset.
Pros:- Dual fans provide over 200 CFM for modest greenhouse exhaust needs.
- Solar power avoids running a dedicated electrical supply to the fan.
- Plug-and-play installation and an extension cable simplify setup.
- Weatherproof design is suited to outdoor placement.
Cons:- Airflow depends on available sunlight, so output can fluctuate.
- No battery is listed for operation after dark or during prolonged cloudy periods.
- One power level limits control compared with adjustable-speed options.
Best for: Small greenhouse owners who want straightforward daytime exhaust and can place the panel in direct sun.
Not ideal for: Growers who need dependable overnight airflow, variable speed, or ventilation for a large greenhouse.
- Power source:Solar
- Solar panel:20W monocrystalline
- Airflow:Over 200 CFM
- Fan speed:3000 RPM
- Voltage:12V
- Motor:DC
- Installation:Plug and play
- Dimensions:0.7 × 15.9 × 7.9 inches
Our verdict“Pick this for small, sun-exposed greenhouses needing uncomplicated daytime ventilation, not continuous or high-volume exhaust.”
iLiving 12″ Wall Mounted Shutter Exhaust Fan with Thermostat and Variable Speed Control
Among these five, I’d favor the iLiving 12-inch for a greenhouse where dependable, wired exhaust matters more than solar flexibility. Its listed 960 CFM airflow, thermostat, and three speeds give it a stronger case for larger spaces than the 200-CFM solar kit, while automatic shutters help close the opening when the fan is off. The galvanized steel and aluminum build also suits a fixed wall installation. The tradeoff is the electrical commitment: it runs on 115V and requires hardwiring, unlike either solar model, so installation is less casual. Its listed noise level is under 65 dB, which may still be noticeable near a quiet greenhouse workspace. Compared with the VEVOR 10-inch, this offers thermostat control and greater listed airflow, but takes more planning to power and mount.
Pros:- Listed 960 CFM airflow suits larger ventilation demands than the small solar kit.
- Thermostat and three speeds provide more control than single-speed fans.
- Automatic shutters close when the fan is off.
- Galvanized steel and aluminum construction is suited to fixed installation.
Cons:- Requires 115V electrical service and hardwired installation.
- Noise may be noticeable in quiet greenhouse settings.
- Wall mounting and electrical work make setup less simple than the solar options.
Best for: Greenhouse growers with a wall opening and electrical access who want thermostat-managed exhaust for a larger growing area.
Not ideal for: Off-grid gardeners, renters, or anyone seeking a plug-and-play solar unit or especially quiet operation.
- Airflow:960 CFM
- Coverage area:1400 sq ft
- Blade size:12 inches
- Power:115V, 0.6A
- Wattage:65W
- Speeds:3
- Fan speed:1650 RPM
- Noise level:Under 65 dB
- Mounting:Wall mount
Our verdict“Choose this for a larger greenhouse with wired power and a need for thermostat control; skip it if simple solar installation is the priority.”
VEVOR 10 Inch Shutter Exhaust Fan Wall-Mount Variable Speed Temperature, Automatic Louvers, Steel Housing, Low Noise for Attic, Garage, Barn, Greenhouse, Workshop
The VEVOR 10-inch is a practical middle ground for growers who want substantial exhaust without stepping up to a larger 12-inch wall fan. It lists 900 CFM at 39W, with stepless speed adjustment, so airflow can be dialed back when full ventilation is unnecessary. Its automatic louvers close when the fan stops, helping limit rain and debris entering through the wall opening. Compared with the iLiving 12-inch, the VEVOR has a smaller blade and lower listed airflow, but offers stepless adjustment and a listed 55 dB noise level rather than the iLiving’s under-65 dB figure. It still needs a 120V supply and a wall cutout, so it is not as flexible to install as either solar option. I’d shortlist it for a small-to-mid-sized greenhouse with AC power.
Pros:- Listed 900 CFM airflow provides substantial exhaust for its 10-inch format.
- Stepless speed control allows finer adjustment than fixed speed settings.
- Automatic louvers help keep rain and debris out when idle.
- 39W rating offers a lower listed draw than the iLiving 12-inch at 65W.
Cons:- Requires 120V AC power, unlike the solar-powered choices.
- Wall mounting requires suitable space and installation work.
- The 10-inch size and 900 CFM rating may fall short for larger greenhouses.
Best for: Small- to mid-sized greenhouse owners with 120V access who want adjustable exhaust and closing louvers.
Not ideal for: Off-grid growers, people avoiding wall modifications, or operators needing more capacity than 900 CFM.
- Airflow:900 CFM
- Fan size:10 inches
- Voltage:120V
- Wattage:39W
- Fan speed:1650 RPM
- Noise level:55 dB
- Speed control:Stepless variable speed
- Mounting:Wall mount
- Dimensions:6.6 × 12.4 × 12.4 inches
Our verdict“Pick the VEVOR for adjustable, wall-mounted exhaust in a modest greenhouse with AC power and a suitable opening.”
Hon&Guan 12-Inch Wall Mount Exhaust Fan with Temperature Humidity Controller, 10-Speed, 971 CFM
I’d put the Hon&Guan ahead of simpler wall fans when a greenhouse’s heat and humidity both shape the ventilation schedule. Its controller is described as adjusting airflow based on temperature and humidity, while 10 speeds and up to 971 CFM give more adjustment than the three-speed iLiving 12-inch. That can help a grower tune exhaust rather than running one fixed setting, though the listing does not provide a noise figure or detailed controller thresholds. The 12-inch aluminum blade and steel construction suit a permanent wall installation, and the required opening is clearly specified. Compared with the VEVOR 10-inch, it offers more listed airflow and more speed steps, but demands a larger opening and still needs AC power. I’d pass if the priority is an off-grid setup or fully specified acoustic performance.
Pros:- Temperature- and humidity-responsive control targets two greenhouse conditions.
- Ten speeds allow finer airflow adjustment than the iLiving’s three settings.
- Listed 971 CFM exceeds the VEVOR 10-inch’s 900 CFM.
- Required opening dimensions are provided for installation planning.
Cons:- Requires AC power, so it does not match the solar models for off-grid use.
- The 12.28-inch-square opening may limit placement options.
- No noise level is listed, making quietness harder to judge before purchase.
Best for: Greenhouse growers managing both heat and humidity who want multiple speed settings in a fixed wall fan.
Not ideal for: Off-grid gardeners, buyers needing a stated noise level, or anyone without space for the required wall opening.
- Airflow:971 CFM
- Blade size:12 inches
- Speeds:10
- Wattage:39W
- Fan speed:1500 RPM
- Power source:AC
- Required opening:12.28 × 12.28 inches
- Dimensions:14.57 × 14.57 inches
- Mounting:Wall mount
Our verdict“Choose this for a powered greenhouse where temperature and humidity control matter more than off-grid operation or a published noise rating.”
Solar Exhaust Fan with Battery & Dual Solar Panels for Greenhouse, Shed
This is the strongest fit here for a greenhouse without convenient mains power. The 1020 CFM rating is well above the simpler Solar Powered Fan Kit’s 200-plus CFM, and the dual solar panels pair with a 60Wh rechargeable battery for operation beyond direct midday sun, including at night according to the product description. Twelve remote-adjustable speeds also give it more control than the single-level kit. Its 50 dB noise rating is listed, though growers sensitive to fan sound should still account for that in a small structure. The compromises are installation and predictability: it is a wall-mounted metal unit, and actual solar charging and runtime will depend on conditions. Compared with the AC-powered Hon&Guan, it avoids a wired supply but relies on its battery and solar input.
Pros:- Listed 1020 CFM airflow exceeds the simpler solar kit’s 200-plus CFM.
- Dual 20W panels and a 60Wh battery support stored-power operation.
- Twelve speed settings and remote control offer broad adjustment.
- Waterproof design is suited to outdoor ventilation.
Cons:- Solar charging and battery runtime depend on sunlight and operating conditions.
- Wall mounting and metal construction may make installation more involved.
- Listed 50 dB noise may be noticeable in a compact greenhouse.
Best for: Off-grid greenhouse owners who want higher exhaust capacity, stored solar power, and remote speed adjustment.
Not ideal for: Growers who need guaranteed continuous airflow regardless of weather or want a quiet, low-effort wall installation.
- Airflow:1020 CFM
- Power source:Solar
- Solar panels:Dual 20W panels
- Battery:60Wh rechargeable
- Speeds:12
- Noise level:50 dB
- Fan speed:1250 RPM
- Mounting:Wall mount
- Dimensions:7.9 × 13 × 13 inches
Our verdict“Choose this for higher-capacity off-grid greenhouse ventilation with battery backup, but not if weather-independent airflow is a must.”
How We Picked
I ranked these greenhouse ventilation fans by how well their stated designs and features match real greenhouse jobs: exhausting warm air, circulating air around plants, or ventilating a compact grow space. I weighed listed airflow, fan type, controls, mounting options, power source, and useful extras such as louvers, timers, humidity sensing, or flexible ducting. Where products list different functions, I judged them within their intended role rather than treating a circulation fan and a wall exhaust fan as interchangeable.
The order favors options with a useful balance of greenhouse fit, controllability, and clearly stated performance. Models with temperature or humidity controls rank ahead of simpler alternatives when those controls support more responsive ventilation, while high-output circulation models stand out for internal air movement. Compact, ducted, and solar products rank for their more specific use cases, not as universal replacements. Product information supplied here does not provide consistent sound, construction, or installation testing, so I avoid treating missing specifications as proof of performance.
| greenhouse ventilation fan | Mounting |
|---|---|
| Greenhouse Circulation Fan 1/2 | Wall mount |
| Cammoo 20 Inch Exhaust Fan wit | Wall mount |
| Grow Tent Fan | Clip clamp |
| VEVOR 12 in Shutter Exhaust Fa | Wall mount with automatic louvers |
| 10 Inch Industrial Exhaust Blo | — |
| Greenhouse Air Circulation Fan | — |
| VIVOSUN AeroWave E6 Gen2 Grow | — |
| iLIVING 20-Inch Wall Mounted S | — |
| 8” Upgraded Shutter Exhaust F | Wall mount |
| Amico 12" Shutter Exhaust Fan | Wall mount |
| Solar Powered Fan Kit for Chic | — |
| iLiving 12" Wall Mounted Shutt | Wall mount |
| VEVOR 10 Inch Shutter Exhaust | Wall mount |
| Hon&Guan 12-Inch Wall Mount Ex | Wall mount |
| Solar Exhaust Fan with Battery | Wall mount |
Factors to Consider When Choosing Greenhouse Ventilation Fans
Before choosing a fan, decide whether you need to remove air from the greenhouse or move it around inside. These are different tasks, and even a strong fan can disappoint when it is installed for the wrong one. I would start with the structure, airflow path, and control needs, then match the fan and its location to those conditions.
Choose Exhaust or Circulation First
An exhaust fan pulls air out of the structure, usually through a wall or opening, while circulation fans redistribute air that is already inside. Many greenhouses benefit from both: exhaust supports air exchange, and circulation helps limit still pockets near foliage. A common mistake is buying a high-CFM circulation fan expecting it to vent hot air outdoors. Check the product’s stated fan type and installation method before comparing airflow figures. If you can buy only one, prioritize the problem you actually have: persistent heat and humidity call for planned air exchange, while uneven airflow may call for internal circulation.
Size Airflow for the Whole Structure
Do not select a fan by diameter or CFM in isolation. Greenhouse volume, roof height, vent area, screens, ducting, and the number of bends in an air path can all affect how much air reaches or leaves the growing space. Flexible ducting and restrictive openings can reduce delivered airflow compared with a clear, direct installation. Use the fan’s stated capacity as a starting point, then check whether its intended mounting and outlet arrangement match your structure. If you are between sizes, compare the practical costs of longer run times, excess noise, and the possibility of adding a second fan rather than assuming the largest model is automatically best.
Plan the Air Path, Not Just the Fan Location
Air needs a route into the greenhouse as well as a route out. An exhaust fan without enough intake area may struggle to move air, while poor placement can leave corners or plant canopies with limited movement. Think about where hot air collects, where cooler replacement air can enter, and whether benches or partitions block the path. For a long or crowded structure, more than one circulation point may spread airflow better than a single powerful fan. Before cutting a wall opening, confirm the mounting dimensions, shutter clearance, wiring route, and access needed for cleaning.
Decide How Much Automation You Need
Thermostats, humidity sensors, variable speeds, timers, and remote controls can help match fan operation to changing conditions, but each adds setup choices. A simple switch may be easier for a small greenhouse where someone checks conditions often; automatic control can be more useful when temperatures fluctuate while the owner is away. Read what the controller actually measures and whether the sensor can be placed where it will represent the growing area. Do not assume that a temperature setting also manages humidity, or that a remote control replaces a reliable thermostat. Match control complexity to the attention you can give the system and the conditions your plants need.
Balance Airflow Against Noise and Energy Use
A fan that runs for long stretches affects both the growing environment and the space around it. Larger motors and higher airflow may suit hot or densely planted structures, but they can bring more sound and power demand than a compact circulation fan. Variable speed gives you room to reduce output when full ventilation is unnecessary, although actual consumption depends on the motor and operating setting. Check electrical requirements, listed certifications, and whether the installation is appropriate for a damp greenhouse environment. Compare the cost of running the fan over your expected schedule, not just its advertised maximum airflow.
Treat Solar Power as a Site-Specific Choice
Solar-powered fans can simplify installation where grid power is unavailable, but sunlight and operating time shape their usefulness. A panel’s placement, shade, weather, battery capacity, and the fan’s draw all affect whether it can run when heat builds. Ask whether the kit stores power for cloudy periods or nighttime, and how much runtime the battery supports under the intended load. A solar fan may work well as supplementary ventilation in a shed or remote greenhouse, but it is a riskier sole system where stable overnight or all-weather operation matters. Compare the solar option with the cost and feasibility of running a safe electrical circuit.
Frequently Asked Questions
Should I buy an exhaust fan or a circulation fan for my greenhouse?
Choose an exhaust fan when your main need is to push hot, humid air out of the structure and draw replacement air through suitable openings. Choose a circulation fan when air already moves through the greenhouse but remains uneven around plants. The 7,860 CFM and 5,470 CFM circulation models in this roundup are not direct substitutes for shutter exhaust fans. Many larger or densely planted greenhouses need both types working together. If you are starting with one fan, identify whether heat buildup or stagnant air is the more persistent problem.
Is a 20-inch exhaust fan necessarily better than a 12-inch model?
No; a larger diameter does not automatically make a fan a better fit. The 20-inch Cammoo and iLIVING models offer a different scale and control set than the listed 12-inch fans, but suitability depends on greenhouse volume, intake openings, installation, and desired airflow. A fan that is oversized for a small structure may be louder or harder to regulate than needed. A smaller unit may be insufficient for a large greenhouse or a restricted air path. Compare stated airflow and control features alongside the dimensions of the opening you can install.
Do I need thermostat and humidity controls, or is a manual switch enough?
A manual switch can work when you regularly monitor the greenhouse and conditions change slowly. Automatic controls are more useful when heat or humidity can rise while you are away, or when you want the fan to adjust without constant attention. The Cammoo, iLIVING, and several smaller shutter-fan options list temperature, humidity, or speed controls, but their control functions vary. Confirm which measurements the controller uses and whether speed can be adjusted separately. Automation helps only when its sensor placement and settings reflect the conditions around your plants.
Can a solar greenhouse fan provide dependable ventilation year-round?
It depends on the panel exposure, battery storage, fan demand, and the weather at your site. The solar kits in this roundup may suit a shed or greenhouse without convenient wiring, but their listing names alone do not establish how long they run after sunset or during cloudy spells. Check battery capacity, charging time, runtime, and whether the fan can operate while the battery charges. If ventilation is needed during heat events regardless of sunlight, plan a backup source or use a grid-powered fan. Treat solar as a system whose performance depends on the full power setup, not just the fan.
What should I check before installing a wall-mounted shutter fan?
Measure the wall opening and confirm the fan’s mounting dimensions, clearance, and access for servicing before cutting. Plan a clear intake path elsewhere in the greenhouse so the exhaust fan can move air rather than pull against a sealed structure. Check electrical supply, moisture exposure, wiring protection, and any applicable local requirements for installation. If the fan vents through ducting, account for bends and length that can restrict airflow. Also consider whether shutters can open freely and whether their location will be obstructed by benches, plants, or exterior structures.
Conclusion
For most buyers comparing the options here, I would start with the Cammoo 20-Inch Exhaust Fan as the best overall choice because it combines 4,000 CFM with temperature, humidity, and speed controls. The VEVOR 12-inch shutter fan is my best value-style pick for buyers who want a wall exhaust design with automatic louvers and variable speed, while the iLIVING 20-Inch model is a stronger fit for buyers prioritizing a larger exhaust fan with thermostat and variable-speed control. Beginners with a compact grow area can start with the 5-inch dual-fan kit for localized movement, but should not mistake it for whole-greenhouse exhaust. For high-volume internal airflow, choose the 1/2 HP circulation fan; for a site without convenient grid power, compare the two solar kits and check their battery and runtime details before relying on one. The best choice is the fan type that addresses your greenhouse’s main airflow problem and fits its power, opening, and control needs.
Evergreen bestsellers Picks
bestsellers
As an affiliate, we earn on qualifying purchases.
