Hang outdoor string lights over your patio by mapping the layout, choosing suitable supports and lights, mounting them securely, and testing the finished setup. This guide is for homeowners and renters with basic measuring and drilling skills; the work usually takes 2–4 hours, depending on the number of supports and whether posts need to be installed.
Get garden gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year

Brightever 100 ft Outdoor String Lights with 52 Shatterproof LED Bulbs
- ✔ Length: 100 feet
- ✔ Installed bulbs: 50 ST38 LED bulbs; 2 spares
- ✔ Bulb spacing: Not specified

MGVIH 100 ft Outdoor LED String Lights with Remote, Dimmable ST38 Bulbs
- ✔ Length: 100 feet
- ✔ Bulbs: 37 ST38 LED bulbs; 2 spares
- ✔ Bulb base: E12

55-Foot Outdoor G40 LED String Lights, 25 Bulbs, IP65 Waterproof
- ✔ Length: 55 feet
- ✔ Bulbs: 25 G40 LED bulbs; 2 spares
- ✔ Bulb spacing: 2 feet
Difficulty: Beginner | Time: 2–4 hours
What You’ll Need
Tools & Materials:
- Outdoor-rated string lights with bulbs and connectors suited to the location
- Tape measure and pencil or removable marking tape
- Ladder rated for your weight and placed on firm, level ground
- Outdoor-rated hooks or screw eyes for existing wood supports
- Drill and suitable bit, if the supports require pilot holes
- Cable ties or clips rated for outdoor use
- Outdoor-rated extension cord, if needed
- GFCI-protected outdoor outlet
Knowledge:
- Basic measuring and marking
- Safe ladder use
- How to drill a pilot hole, if required
Check the light manufacturer’s instructions for allowed connections, mounting hardware, spacing, and weather exposure. Ask the property owner before drilling into a rental. Do not attach lights to utility lines, unstable branches, gutters, or a surface that cannot hold the load. If the layout requires work near electrical wiring or a permanent electrical connection, contact a qualified electrician.
Brightever 100 ft Outdoor String Lights with 52 Shatterproof LED Bulbs

For a patio that needs a long, even run of light, Brightever is our strongest all-around fit. Its 100-foot strand has 50 installed ST38 bulbs, giving it a denser layout than MGVIH’s 37 bulbs over the same length. That difference matters when you want the lights to define a seating area rather than simply mark its perimeter. The 2700K warm-white output also keeps the look suited to relaxed outdoor dining and conversation.Brightever supports end-to-end connection with up to 15 strands, which gives larger patios room to expand. Built-in hanging hooks help with installation, and the shatterproof plastic bulbs are a practical choice in an exposed setting. Compared with the 55-foot G40 set, this model covers a much larger area and uses more bulbs, but it also needs more space and cable routing. The tradeoff is control: it is dimmable only with a compatible dimmer sold separately, while MGVIH includes a remote with brightness levels and timer settings. It also needs a plug-in AC power source, so outlet placement remains part of the plan.
Pros:
- 50 installed ST38 bulbs across a 100-foot strand
- Connectable with up to 15 strands
- Shatterproof plastic bulbs and weatherproof construction
- Built-in hanging hooks and two spare bulbs
Cons:
- Compatible dimmer is sold separately
- Requires a 120-volt plug-in power source
- Long strand may be excessive for small patios
Best for: Patio owners who want a 100-foot run with relatively dense bulb placement and the option to connect additional strands.
Not ideal for: People with a compact patio, no convenient outdoor outlet, or a preference for remote brightness and timer control included in the set.
Bottom line: Brightever is our top choice when a patio needs broad, fuller-looking coverage and flexible expansion, provided you can supply power and arrange separate dimming.
“Brightever is our top choice when a patio needs broad, fuller-looking coverage and flexible expansion, provided you can supply power and arrange separate dimming.”
MGVIH 100 ft Outdoor LED String Lights with Remote, Dimmable ST38 Bulbs

When patio lighting needs to shift from bright task lighting to a softer evening glow, MGVIH offers the most convenient controls in this group. Its remote selects among four brightness levels, three lighting modes, and 3- or 5-hour timers. That makes it easier to adjust the lights without reaching the plug or adding a separate dimmer, unlike Brightever and the shorter G40 set, whose dimming requires a compatible accessory sold separately.The 100-foot run gives MGVIH the same nominal reach as Brightever, and built-in hooks simplify hanging. Its 37 ST38 bulbs are more widely distributed than Brightever’s 50 installed bulbs across the same length, so the look may feel less filled in. That lower bulb count can suit a patio where the goal is a gentle perimeter glow rather than a dense canopy. The PET bulbs are shatterproof and carry an IP65 waterproof rating for outdoor use. The main constraints are shared with the other corded sets: you need an outlet, and the remote itself requires two AAA batteries. Choose this one for adjustable ambiance; choose Brightever if bulb density and expansion matter more.
Pros:
- Remote provides four brightness levels and three lighting modes
- 3-hour and 5-hour timer settings
- IP65 waterproof rating and impact-resistant PET bulbs
- Built-in hooks for hanging
Cons:
- 37 bulbs across 100 feet provide less dense coverage than Brightever
- Requires corded electric power
- Remote requires two AAA batteries
Best for: People who want to change brightness or set a timer from their seat without buying a separate dimmer.
Not ideal for: Buyers seeking the densest bulb coverage, a battery-powered setup, or lighting that needs no remote batteries.
Bottom line: MGVIH is the better pick for hands-off brightness and timer adjustments, though Brightever gives a 100-foot patio a fuller bulb layout.
“MGVIH is the better pick for hands-off brightness and timer adjustments, though Brightever gives a 100-foot patio a fuller bulb layout.”
55-Foot Outdoor G40 LED String Lights, 25 Bulbs, IP65 Waterproof

For a small patio, balcony, or a single seating zone, the 55-foot G40 set avoids the extra reach of the two 100-foot options. It includes 25 warm-white bulbs spaced two feet apart, creating a deliberately open pattern rather than the denser coverage offered by Brightever. That spacing can work well when lights are meant to frame a railing, pergola edge, or compact dining area without crowding the space.The 2200K color temperature is warmer than the 2700K output specified for Brightever and MGVIH, giving this set a more amber-toned appearance. Its shatterproof plastic bulbs, IP65 rating, and capacity to connect up to 14 strings make it versatile for outdoor use and future expansion. Each bulb works independently if another goes out, and two spare bulbs are included. However, the shorter strand is not the efficient choice for broad patios: connecting multiple runs adds installation planning, and the 120-volt cord still needs a suitable outlet. Like Brightever, dimming requires a compatible dimmer that is not included. We would choose it over the longer sets for a modest area, but not where dense, expansive coverage is the priority.
Pros:
- Compact 55-foot length suits smaller areas
- 2200K warm glow and two-foot bulb spacing
- IP65 rating and shatterproof plastic bulbs
- Connectable up to 14 strings; bulbs work independently
Cons:
- Covers less area than either 100-foot option
- Compatible dimmer is not included
- Requires corded 120-volt power
Best for: Owners of smaller patios who want warm, widely spaced lights and may add compatible strands later.
Not ideal for: Anyone lighting a broad patio in one run or wanting remote controls and timer functions included.
Bottom line: This G40 set is the sensible compact choice for a smaller patio, while Brightever and MGVIH are better suited to longer runs.
“This G40 set is the sensible compact choice for a smaller patio, while Brightever and MGVIH are better suited to longer runs.”
As an Amazon Associate we earn from qualifying purchases.
Before You Start
Choose a dry, calm time and keep the lights unplugged while you measure and mount them. Make a sketch of the patio and mark the outlet, doors, walking routes, and planned support points. Keep the cord and bulbs clear of doors, moving fans, grills, and other heat sources. Check local rules or property requirements if you plan to add permanent posts or drill into a shared structure.
Use only lights and extension cords marked for outdoor use. Follow the product instructions for connecting strands; do not exceed the stated maximum. Plan the route so cords do not cross a walkway or sit where water collects. If you cannot keep the power connection protected as the instructions require, choose a different location or ask an electrician for advice.
Step-by-Step Instructions
Step 1: Map the light pattern
Measure the patio and draw the support points, outlet, and desired light path. Choose a simple pattern, such as parallel runs or a zigzag, and account for the distance from the outlet to the first bulb. Leave room for doors to open and people to move without hitting low-hanging strands. Add a modest amount of slack for the curves between supports, but avoid planning a deep sag.
Tip: Compare your sketch with the light strand length and any manufacturer limits on connecting strands. A route that looks short on paper may need extra length to reach around corners.
Check: Your sketch shows every support point and the complete route from the outlet to the last light, with no strand crossing a doorway or walking path.
Step 2: Choose the supports
Identify sound wood beams, posts, or other structural supports that can hold the lights. If the patio has no suitable attachment points, use stable, purpose-made freestanding posts designed for outdoor string lights and follow their assembly and anchoring instructions. Do not rely on a gutter, thin trim, loose fence panel, or lightweight umbrella frame to carry the strand.
Tip: For a rental or shared property, get permission before making holes. If you are unsure whether a beam or wall can take the load, ask a qualified tradesperson rather than guessing.
Check: Each planned attachment point is sturdy, accessible with a ladder, and positioned so the strand will clear people and nearby equipment.
Step 3: Check the lights and power route
Read the product label and instructions to confirm that the lights are suitable for outdoor use and the expected exposure. Check the strand, sockets, plug, and bulbs for cracks, corrosion, or other damage; replace damaged equipment. Confirm the outlet is GFCI-protected, and use an outdoor-rated extension cord only if the manufacturer allows it.
Tip: Do not substitute indoor lights or indoor extension cords, even under a roof. A covered patio can still experience damp air, windblown rain, or condensation.
Check: The complete light strand and any extension cord are undamaged, rated for the location, and within the manufacturer’s connection limits.
Step 4: Mark and install the attachment points
Mark the hook positions using your sketch. Set each point high enough to provide comfortable clearance while allowing a gentle curve in each run. Drill pilot holes if the hardware instructions or support material call for them, then install outdoor-rated hooks or screw eyes firmly in sound structural material. Assemble and anchor any purpose-made freestanding posts according to their instructions, then verify that each post is stable before hanging the lights.
Tip: Follow the fastener manufacturer’s guidance for the support material. A hook driven only into thin trim may pull out under the strand’s weight or in wind.
Check: The attachment points do not wobble or pull free when checked gently, and their positions match the planned route.
Step 5: Hang the strand without tension
Keep the lights unplugged. Attach the strand to each hook with outdoor-rated clips or ties that fit the cable, starting near the outlet. Support the strand at the planned points and leave a gentle, even curve between them. Do not pull the cable tight, staple through it, or hang the lights by the bulbs or sockets. Route the plug end toward the outlet without letting the cord trail across a walking area.
Tip: If the manufacturer calls for a separate support cable, install it as directed and attach the light strand to that cable. Do not improvise a cable system if you are unsure how to anchor it.
Check: The strand follows the planned pattern, its weight rests on the supports, and no section is taut or pinched.
Step 6: Connect and test the lights
Connect the strand as the instructions specify with dry hands and the area clear, then plug it into the GFCI-protected outdoor outlet. Turn the lights on and inspect the full route from several positions. Check that every bulb lights, connections remain out of puddles, and cords stay clear of doors, walking routes, heat, and moving equipment. Turn the lights off and unplug them before adjusting any attachment.
Tip: If a GFCI trips, unplug the lights and check for damage, moisture, or an overloaded connection. Do not keep resetting a GFCI that trips repeatedly.
Check: The lights operate across the entire strand, the GFCI stays set, and the finished route has no exposed damage, obstruction, or unsafe contact.
Common Mistakes to Avoid
- Using indoor lights or a household extension cord outdoors. — Check the labels and use equipment rated for outdoor exposure. Follow the light maker’s instructions for connections and weather protection.
- Attaching the strand to gutters, weak trim, or loose supports. — Mount hooks only to sound structural material, or use stable posts made for string lights. Check supports before hanging the strand.
- Pulling the strand tight or letting it hang too low. — Plan gentle, even curves and enough clearance for walking. Let the supports carry the load instead of stretching the cable between them.
- Routing the plug or extension cord through a puddle or across a walkway. — Choose a dry route that does not obstruct foot traffic, and follow the manufacturer’s instructions for protecting power connections.
Troubleshooting
Problem: One or more bulbs do not light.
Solution: Unplug the strand. Check that bulbs are seated correctly and that connectors are joined as directed. Replace a failed bulb only with the specified type, then reconnect and test.
Problem: The GFCI trips when the lights are connected.
Solution: Unplug the strand and inspect it and its connections for damage or moisture. Dry and reconnect only when the equipment is in good condition and the manufacturer permits it. If the GFCI trips again, stop using the setup and have the outlet or lights checked.
Problem: A strand sags unevenly or a hook moves.
Solution: Unplug the lights and take the weight off the affected point. Replace the weak attachment with correctly rated hardware anchored in sound material, then rehang the strand with even spacing and gentle curves.
Problem: The outlet is too far away for the planned layout.
Solution: Rework the route to reach the outlet without crossing a walking path, or use an outdoor-rated extension cord that the light manufacturer permits. Do not connect more strands or cords than the product allows.
What Success Looks Like
The lights follow the planned pattern with even spacing and comfortable clearance. Every support is stable, the cable has gentle curves without sharp bends or tension, and no bulb or connection is damaged. The whole strand lights when switched on, the GFCI remains set, and cords stay out of walkways and standing water.
Next Steps
Switch the lights off and unplug them before cleaning, replacing bulbs, or changing the layout. After storms and periodically during the season, check the hooks, posts, cable, and connections for movement or damage. Follow the manufacturer’s storage instructions if you take the lights down for winter. Stop using the strand if it becomes damaged, and replace it with a compatible outdoor-rated product.
Frequently Asked Questions
How high should patio string lights hang?
Hang them high enough to clear people and normal patio activity, with a gentle curve between supports. The right height depends on the patio, the light pattern, and whether people walk beneath the strands; check clearance from several positions before plugging them in.
Can I hang string lights without drilling?
Yes, if you can use stable freestanding posts made for outdoor string lights or existing structural attachment points. Do not use adhesive hooks or lightweight fixtures unless their maker specifically rates them for the location and load.
Can outdoor string lights stay up in the rain?
Only if the lights and all connected equipment are rated for the exposure and installed as their instructions specify. Keep plugs and connections protected as directed, and unplug the lights if damage, water intrusion, or repeated GFCI trips occur.
How many strands can I connect together?
Use the maximum connection count printed in the product instructions or on the label. Limits vary by product, so do not assume that strands from different models can be linked safely.
